 |
|
|
|
MultiSwiss is a revolutionary new line of products that bridges the gap between single-spindle and multispindle lathes. MultiSwiss is equipped with 6 sliding headstock spindles that use torque motor technology for barrel indexing. Its ultra-high speed makes it possible to achieve near cam driven multispindle cycle times. |
Views:
151
3
ratings |
| Time:
02:28 |
More in
Science & Technology |
|
|
|
|
|
Single-spindle automatic turning machine with sliding headstock and NC. Capacity up to 38 mm 5 linear axes and 2 C axes 2 versions Up to 31 tools, including 9 rotating tools Power 11 kW maximum for removing large amounts of swarf |
Views:
256
1
ratings |
| Time:
04:42 |
More in
Science & Technology |
|
|
|
|
|
Check www.multiswiss.info for more details! The MultiSwiss, the machine is a NC 6 spindles machine of capacity up to 14 mm with advanced characteristics as never seen on the market. It is too early to know a lot about the machine, what we've been able to gather as of today is: The machine has the same footprint as a single spindle of equivalent capacity (but with 6 (!) spindles) Spindles are hydrostatic It is the first multispindle with sliding heads The machine has a level of integration never seen before Several machines have been tested for months by selected customers and it seems the results exceed expectations |
Views:
578
1
ratings |
| Time:
00:37 |
More in
Science & Technology |
|
|
|
|
|
Monoaxial screw machined on a Tornos Swiss Type Lathe EvoDECO 16a. The two powerful spindles with synchronous motors allows EvoDECO to cut drastically cycle time. With 4 fully independant tool system ans up to 10 axes and 2 C axis EvoDECO is a perfect fit for any part from simple one till very complex one. EvoDECO 16a is a major technological evolution of the DECO platform. |
Views:
2446
2
ratings |
| Time:
05:07 |
More in
Science & Technology |
|
|
|
|
|
TORNOS EvoDECO 16a Complete Dental Implant (E16015, E16016, E16017) |
Views:
1695
0
ratings |
| Time:
07:42 |
More in
Science & Technology |
|
|
|
|
|
TORNOS EvoDECO 10a Pacemaker Connector (EV1003) |
Views:
359
0
ratings |
| Time:
02:07 |
More in
Science & Technology |
|
|
|
|
|
Productivity and Precision from 3 to 6 Axes |
Views:
469
0
ratings |
| Time:
03:44 |
More in
Science & Technology |
|
|
|
|
|
Ultra precise 3 to 5-axis machining centre |
Views:
1200
3
ratings |
| Time:
05:43 |
More in
Science & Technology |
|
|
|
|
|
NC automatic, single-spindle sliding headstock lathes Capacity up to 8 (10) mm To accomodate the reasonably complex parts market that demands the highest levels of precision and quality, TORNOS has developed the new Micro product range. The Micro 8 automatic lathe with sub spindle and 8mm capacity has five basic linear axes providing an excellent price-to-performance ratio! The kinematics are perfectly adapted to execute reasonably complex parts. It is a technological solution that allows Tornos to offer an automatic lathe that guarantees a degree of precision of ± 1µ (0.001mm) during turning operation on the precision tool system, T21 and T22 ! This machine addresses new markets such as the electronics and especially the mini-disk sector for mobile IT applications. This machine can respond to a multitude of requirements for the watch, automotive, medical and the electronics industries. |
Views:
1999
4
ratings |
| Time:
03:01 |
More in
Science & Technology |
|
|
|
|
|
DECO 20a NC automatic, single-spindle sliding headstock lathe Capacity up to 20 (25.4) mm In order to comply with our customers' needs for optimal flexibility we offer the DECO 20a in 2 versions : 8 axes with independent pickoff spindle, 17 tools, 13 of which can be revolving. 10 axes with end attachment and independent pickoff spindle, 21 tools, 17 of which can be revolving. In all versions, the axes C1 (spindle) and C4 (counter spindle) optional equipment, enlarge, the machining scope of the machine. |
Views:
712
1
ratings |
| Time:
07:11 |
More in
Science & Technology |
|
|
|
|
|
DECO 13e NC automatic, single-spindle sliding headstock lathe Capacity up to 13 (16) mm By virtue of the international success enjoyed by the DECO turning machines, Tornos has developed and offers a large variety of units, tool holders and peripheral equipment for the production of multiple specific machining operations including : external and internal thread-whirling (applications in the MEDTEC sector). polygonal machining of flats. tangential milling (threads for dental posts). cutting / milling for gear hobbing. high pressure deep drilling at 340 and 120 bars. swaging different shapes. high-speed milling with HF 80000 rpm spindle for machining complex shapes and Torx. |
Views:
7145
5
ratings |
| Time:
05:17 |
More in
Science & Technology |
|
|
|
|
|
Delta 20 NC automatic, single-spindle sliding headstock lathes A product range dedicated to machine simple parts. Capacity to 20 mm. With Tornos Delta 20 you can produce simple parts with the best tailored machine without question. A true Tornos quality and precision product range. One machine for each and every need with 4 or 5 linear axes. Fast and simple to set up. Machining with or without guide bush. Ergonomics and flexibility. Very attractive price. |
Views:
1946
1
ratings |
| Time:
02:50 |
More in
Science & Technology |
|
|
|
|
|
DECO 13e NC automatic, single-spindle sliding headstock lathe Capacity up to 13 (16) mm The main strengths of the line : Machining performance Productivity Part and markets Return on investment Your benefits : The 'e' line completes the range of Tornos machining solutions for the production of straightforward to complex parts with optimum value for money and optimum productivity. |
Views:
526
0
ratings |
| Time:
01:47 |
More in
Science & Technology |
|
|
|
|
|
Micro 8 NC automatic, single-spindle sliding headstock lathes Capacity up to 8 (10) mm The Micro 8 automatic lathe with sub spindle and 8mm capacity has five basic linear axes providing an excellent price-to-performance ratio! The kinematics are perfectly adapted to execute reasonably complex parts. It is a technological solution that allows Tornos to offer an automatic lathe that guarantees a degree of precision of ± 1µ (0.001mm) during turning operation on the precision tool system, T21 and T22 ! This machine addresses new markets such as the electronics and especially the mini-disk sector for mobile IT applications. This machine can respond to a multitude of requirements for the watch, automotive, medical and the electronics industries. Main advantages : ±1 µ ! The most precise parts on the market are within your reach (with the precision tool system, T21 and T22) It can tackle all kinds of material Responsive 15000 rpm spindle The horsepower for today's tooling and materials Multiple configurations available for different applications Small foot print Optimized design for set-up, production and maintenance |
Views:
1141
3
ratings |
| Time:
02:15 |
More in
Science & Technology |
|
|
|
|
|
DECO 13e NC automatic, single-spindle sliding headstock lathe Capacity up to 13 (16) mm Machining performance Motorisations of the main spindles, counter spindles and of the different rotary tools provides efficient operation in terms of power, available torque and quality of finish product all under the optimum cutting conditions. The available tool systems are designed to be modular and adaptable on various machine tools with the kinematics being interchangeable with the DECO 'a' line. By virtue of the international success enjoyed by the DECO turning machines, Tornos has developed and offers a large variety of units, tool holders and peripheral equipment for the production of multiple specific machining operations including : external and internal thread-whirling (applications in the MEDTEC sector). polygonal machining of flats. tangential milling (threads for dental posts). cutting / milling for gear hobbing. high pressure deep drilling at 340 and 120 bars. swaging different shapes. high-speed milling with HF 80000 rpm spindle for machining complex shapes and Torx. |
Views:
2949
4
ratings |
| Time:
02:09 |
More in
Science & Technology |
|
|
|
|
|
Micro 7 NC automatic, single-spindle sliding headstock lathes Capacity up to 7 (8) mm Solid construction, minimizing thermal and vibration effects. Cast iron components of rigid construction, developed using CAD techniques and finite element analysis. Monobloc cast iron base and bench / frame. Highly rigid tool support mounted directly on the machine bench. Independent system with two very high precision tools. (During turning operation on the precision tool system, T21 and T22) Benefits : Productivity. Precision of +/- 2 microns in production. (with the precision tool system, T21 and T22) Flexibility and modularity. Simplicity. Value. Strength : Rigid structure offering great machining stability in production. No micro-vibrations, meaning longer cutting tool life. |
Views:
6634
7
ratings |
| Time:
03:14 |
More in
Science & Technology |
|
|
|
|
|
MultiSigma 8x24 Automatic, NC multispindle lathes 8 spindles Capacity: 4-22 (25) mm (with preparation) With the new MultiSigma 8x24 Tornos offers a complete and unique solution to produce complex parts in one set up. Eight powerful and independent spindles allow the highest degree of flexibility whilst an integrated robot allows the unloading of parts into a pallet. TB-DECO programming software offers great comfort in programming. Combined with a vast array of option such as up to eight independent frontal units, y-axis, multiple tool holder, PC control remote diagnostics, the MultiSigma 8x24 is the machine of choice for highly demanding parts. The legendary high precision, large working area provides accessibility and the bar loader and chip management system allow an overall, complete and high performing solution - all in one machine. Main advantages : 8 motorspindles with independent spindle speeds Double back working operation and double cycle Integrated palettizing High precision Maximum flexibility High output |
Views:
692
2
ratings |
| Time:
03:58 |
More in
Science & Technology |
|
|
|
|
|
Micro 7 NC automatic, single-spindle sliding headstock lathes Capacity up to 7 (8) mm To ensure very high precision the Micro 7 applies the tried and tested technologies that made the Micro 8 such a success. Solid construction, minimizing thermal and vibration effects. Cast iron components of rigid construction, developed using CAD techniques and finite element analysis. Monobloc cast iron base and bench / frame. Highly rigid tool support mounted directly on the machine bench. Independent system with two very high precision tools. (During turning operation on the precision tool system, T21 and T22) Benefits : Productivity. Precision of +/- 2 microns in production. (with the precision tool system, T21 and T22) Flexibility and modularity. Simplicity. Value. Strength : Rigid structure offering great machining stability in production. No micro-vibrations, meaning longer cutting tool life. |
Views:
789
1
ratings |
| Time:
03:28 |
More in
Science & Technology |
|
|
|
|
|
MultiAlpha 8x20 Automatic, NC multispindle lathes 8 spindles Capacity: 4-20 (24) mm (with preparation) The automotive sector is continually becoming more demanding with production growing in complexity and more second and third operations being required. With the new MultiAlpha 8x20 the optimum number of components can now be machined in one-hit without having to relocate parts for secondary operations! The MultiAlpha 8x20 enables users to maximize the potential of new cutting tool technologies! The versatility of the MultiAlpha 8x20 goes even further with its 8 motorized spindles and two counter-spindles, each of which can work with 5 tools. The MultiAlpha 8x20 allows its operators to envision new opportunities... The main benefits enable you... To have the ideal cutting speed at your disposal at all times, thanks to the 8 motorized spindles running independently. To complete more complex parts through multiple back-operations. To control part extraction thanks to the two numeric part manipulators. To save space thanks to the integral palletization. |
Views:
209
1
ratings |
| Time:
06:25 |
More in
Science & Technology |
|
|
|
|
|
Sigma 32 NC automatic, single-spindle sliding headstock lathes Capacity up to 32 mm In counter operations with as much as 3x the rigidity than its competitors the SIGMA 20 / SIGMA 32 allows for a profitability as much as 30% higher for parts where the machining operations are well balanced between main and counter operations. Identical rigidity and identical spindles in main and counter operations. The tool wear and the machining quality are directly linked to the machine rigidity. On the SIGMA 20 / 32, it is no longer necessary to favor the machining operations to the work done in main operations so to optimize the quality and machining autonomy of the machine. The headstock and counter spindle are on the same plane. A cushioning system absorbs important accelerations |
Views:
343
0
ratings |
| Time:
05:12 |
More in
Science & Technology |
|
|
|
|
|
Micro 8 NC automatic, single-spindle sliding headstock lathes Capacity up to 8 (10) mm The Micro 8 automatic lathe with sub spindle and 8mm capacity has five basic linear axes providing an excellent price-to-performance ratio! The kinematics are perfectly adapted to execute reasonably complex parts. It is a technological solution that allows Tornos to offer an automatic lathe that guarantees a degree of precision of ± 1µ (0.001mm) during turning operation on the precision tool system, T21 and T22 ! This machine addresses new markets such as the electronics and especially the mini-disk sector for mobile IT applications. This machine can respond to a multitude of requirements for the watch, automotive, medical and the electronics industries. Main advantages : ±1 µ ! The most precise parts on the market are within your reach (with the precision tool system, T21 and T22) It can tackle all kinds of material Responsive 15000 rpm spindle The horsepower for today's tooling and materials Multiple configurations available for different applications Small foot print Optimized design for set-up, production and maintenance |
Views:
331
0
ratings |
| Time:
02:18 |
More in
Science & Technology |
|
|
|
|
|
Micro 8 NC automatic, single-spindle sliding headstock lathes Capacity up to 8 (10) mm The Micro 8 automatic lathe with sub spindle and 8mm capacity has five basic linear axes providing an excellent price-to-performance ratio! The kinematics are perfectly adapted to execute reasonably complex parts. It is a technological solution that allows Tornos to offer an automatic lathe that guarantees a degree of precision of ± 1µ (0.001mm) during turning operation on the precision tool system, T21 and T22 ! This machine addresses new markets such as the electronics and especially the mini-disk sector for mobile IT applications. This machine can respond to a multitude of requirements for the watch, automotive, medical and the electronics industries. Main advantages : ±1 µ ! The most precise parts on the market are within your reach (with the precision tool system, T21 and T22) It can tackle all kinds of material Responsive 15000 rpm spindle The horsepower for today's tooling and materials Multiple configurations available for different applications Small foot print Optimized design for set-up, production and maintenance |
Views:
892
0
ratings |
| Time:
02:36 |
More in
Science & Technology |
|
|
|
|
|
Sigma 20 NC automatic, single-spindle sliding headstock lathes Capacity up to 20 (25.4) mm Following its strategy of catering for numerous market requirements with finely adapted products, Tornos has launched the new Sigma 20. The new machine has programming and kinematics geared towards simplicity and this is coupled with strong mechanical elements to guarantee high precision. The new Sigma 20 has 6 linear axes that make it ideal for producing reasonably complex parts whilst providing an excellent price-to-potential ratio. Furthermore, with its 22 tool positions and a high level of interchangeability the Sigma 20 can ensure an exceptional flexibility to its users. Main advantages: All tool holders and accessories can be interchanged between two tool systems. Exceptional ease of use and user-friendliness. Choice of programming: TB-DECO or ISO. Optimum ergonomics enable easy setup and tool changes. Extremely strong construction as verified by quality of finished components. Efficient chip flow and evacuation. Dedicated tooling for main and counter-spindle allow two tools to cut simultaneously. |
Views:
796
1
ratings |
| Time:
05:37 |
More in
Science & Technology |
|
|
|
|
|
ALMAC CU 1007 Ultra precise 3 to 5-axis machining centre Requiring just 2.5 m² of floor space, the ALMAC CU 1007 machining centre is indeed worthy of its title, the smallest of the biggest. Three to five extremely precise axes dedicated to producing complex microtechnical components, with strict technological requirements... at an unbeatable price ! The design of the CU 1007 ensures great flexibility allowing it to cover a large range of machining fields : watchmaking, jewellery, the medical industry and electronics, etc. Its versatility results from its modular design, its extremely easy to programme CNC control system, as well as its basic configuration : tool changer, 30'000 rpm motor spindle, and 1/10 μm incremental scales on the three axes. |
Views:
219
0
ratings |
| Time:
03:47 |
More in
Science & Technology |
|
|
|
|
|
FB 1005 CNC 3 to 6-axis horizontal milling The Almac FB 1005 is a horizontal bar milling machine, capable of simultaneous machining on 3, 4, 5 or 6 axes, designed for producing high precision parts from either raw material (profile bar) or semi-finished products. |
Views:
379
0
ratings |
| Time:
05:39 |
More in
Science & Technology |
|
|
